Cube announced the TWO15 on August 12 as part of its 2027 range, a completely redesigned 200mm downhill frame in High Performance Aluminium running a high main pivot with an idler pulley. It is the second high pivot Cube has launched in a single model year, alongside the Fritzz enduro bike.
The suspension layout is the headline. The geometry chart is the more interesting document, because across three frame sizes it changes exactly two rows.
The chart Cube publishes
| Slack / Moderate | M | L | XL |
|---|---|---|---|
| Reach | 447 / 445 | 467 / 465 | 486 / 485 |
| Stack | 655 / 657 | 655 / 657 | 655 / 657 |
| Head tube angle | 63.3° / 63.8° | 63.3° / 63.8° | 63.3° / 63.8° |
| Seat angle | 78.5° / 78.3° | 78.5° / 78.3° | 78.5° / 78.3° |
| Chainstays | 440 | 440 | 440 |
| Wheelbase | 1264 / 1257 | 1284 / 1277 | 1304 / 1297 |
| Top tube horizontal | 561 / 562 | 581 / 582 | 601 / 602 |
| Seat tube | 400 | 400 | 400 |
| Head tube | 124 | 124 | 124 |
| BB height to hub | 10 / 8 | 10 / 8 | 10 / 8 |
Source: Cube’s own product page for the TWO15 SLX, where the paired values are labelled Slack and Moderate. Those two columns are headset settings, not wheel sizes: the head angle row moves 0.5 degrees between them and nothing else about the bike changes. Cube’s own frame description lists adjustable head angle, reach, bottom bracket horizontal position and progression, so the published pair is the narrowest version of what the frame can be set to.
One row deserves a caveat. “BB height to hub” is Cube’s label, and at 10mm and 8mm it is not the bottom bracket drop figure most charts publish. It is quoted here as Cube quotes it rather than converted into something it may not be.
Nine rows out of eleven never move
Read down the columns instead of across them. Stack is 655mm on M, L and XL. Head tube length is 124mm on all three. Seat tube is 400mm on all three. Chainstays are 440mm on all three. Head angle, seat angle and the bottom bracket row are identical as well.
Only reach and wheelbase change, and they change by the same amount: 39mm of reach from M to XL, 40mm of wheelbase. The front wheel moves away from the rider. Nothing else does.
That is a cleaner statement of intent than most charts offer. Cube built one front end, one rear end and one cockpit height, then stretched the gap between the bars and the front axle three ways.
How that compares with the downhill field
Fixed stack is normal in downhill, where riders are standing and bar height is set by the fork and the crown rather than by the frame. Run the other bikes in the bike geometry comparison calculator and two of them do the same thing: the Trek Session 2026 and the Specialized Demo 11 2026 both hold stack flat across every size.
The difference is at the back. The Session still varies its rear centre by 13mm across its three sizes, and the Demo 11 varies it by 20mm. Both of those bikes decided that a taller rider needs more bike behind them as well as in front. The TWO15 holds 440mm for everybody.
The bikes that do move stack move it meaningfully: 27mm across the Norco Aurum 2020, 21mm on the Giant Glory 2025, 18mm on the Santa Cruz V10 2025, 13mm on the Canyon Sender 2025. So the TWO15 sits at one end of current practice rather than in the middle of it.
The consequence is a ratio that drifts. On the M, 440mm of rear centre against 447mm of reach is very nearly balanced. On the XL, reach is 486mm against the same 440mm, so the rider carries 46mm more bike in front of them than behind. On a downhill bike that mostly matters in flat corners, where weighting the front tyre is the whole job, and it matters least in a straight line where the extra wheelbase is pure stability.
The practical version
The XL rider gets the same bar height as the M rider. On a bike with a 124mm head tube and a fork crown that does not care what size frame it is bolted to, anyone moving up a size for reach is buying length and nothing else, and will likely want to find their front end height in the bar rise and the stem.
The 400mm seat tube on all three sizes is a sensible decision on a bike with no dropper and a saddle that lives out of the way. The mullet wheel setup is standard rather than optional, and the 2.5in Magic Mary and Tacky Chan pairing is the same tyre combination Cube specs on the Fritzz.
There is no S. The Fritzz runs S to XL and the TWO15 starts at M, which is the usual story for downhill frames and leaves the shortest riders looking at the 27.5in field.
Where it sits
The TWO15 is a 1264mm to 1304mm wheelbase on a 63.3 degree head angle, which is long and slack without being extreme by 2027 standards. Put it next to the Session and the Demo 11 in the comparison calculator and the three bikes read as variations on one idea, with the TWO15 the most committed to treating frame size as a reach adjustment.
What the chart cannot tell you is how a fixed 440mm rear centre feels under a tall rider once a high pivot and an idler start moving the axle rearwards through the stroke. The static number is the starting point, and on this layout the starting point is the one position the bike leaves as soon as the track gets rough.
